EQUIPMENT COMPOSITION
EQUIPMENT IMAGE
EQUIPMENT INTRODUCTION

500/1000 Mixer

This high speed plastic mixer is composed of two parts , hot mixing and cool mixing equipment , at same time ,it has drying function .

Loader/Feeder

Plastic Material Loader suitable for Extruders and Mixers. It carrys the plastic powder by screw into the hopper of Machine.

Conical Twin Screw Extruder

Conical twin screw extruder is a kind of special equipment for extruding PVC powder.With different molds and auxiliary machines, it can produce all kinds of PVC plastic pipes, profiles, plates, sheets, bars and pellets.

T-die

Extrusion T Mold with Flat Die for PVC skinning (WPC) foaming board extrusion sheet machine.

Calibration table

It is composed of four sets (eight sets) of sizing tables, so that the material becomes the required foam board, and by changing it, the thickness of the board can be changed.

Cooling Bracket

Equipped with corresponding guide rollers, the cooling effect is better. In addition, the equipped trimming device can ensure the fixed width and trimming quality of the board (sheet).

Haul-off unit and cross cutter

The traction necessary to move the PVC foam board down the processing line is provided by the hauling machine.Our haul-off machine has 8 rollers for precise position of the foaming board for cutting.

Cutting unit

The auto cutter relies on photoelectric sensors and computerized meters to accurately measure the required length before releasing the blade. So, it tend to be very precise.

Stacker

The stacker receives the unload signal from the auto cutter. Then it automatically unloads the board and stacks it with rest of the finished products.

Grinding and pulverizer combined machine

The PVC crusher cuts big pieces of PVC foam board into small bits; so that they can be grind or pulverized into powder that’s mixed with the fresh batch of raw materials.