EQUIPMENT COMPOSITION |
EQUIPMENT IMAGE |
EQUIPMENT INTRODUCTION |
---|---|---|
500/1000 Mixer |
|
This high speed plastic mixer is composed of two parts , hot mixing and cool mixing equipment , at same time ,it has drying function . |
Loader/Feeder |
|
Plastic Material Loader suitable for Extruders and Mixers. It carrys the plastic powder by screw into the hopper of Machine. |
Conical Twin Screw Extruder |
|
Conical twin screw extruder is a kind of special equipment for extruding PVC powder.With different molds and auxiliary machines, it can produce all kinds of PVC plastic pipes, profiles, plates, sheets, bars and pellets. |
T-die |
|
Extrusion T Mold with Flat Die for PVC skinning (WPC) foaming board extrusion sheet machine. |
Calibration table |
|
It is composed of four sets (eight sets) of sizing tables, so that the material becomes the required foam board, and by changing it, the thickness of the board can be changed. |
Cooling Bracket |
|
Equipped with corresponding guide rollers, the cooling effect is better. In addition, the equipped trimming device can ensure the fixed width and trimming quality of the board (sheet). |
Haul-off unit and cross cutter |
|
The traction necessary to move the PVC foam board down the processing line is provided by the hauling machine.Our haul-off machine has 8 rollers for precise position of the foaming board for cutting. |
Cutting unit |
|
The auto cutter relies on photoelectric sensors and computerized meters to accurately measure the required length before releasing the blade. So, it tend to be very precise. |
Stacker |
|
The stacker receives the unload signal from the auto cutter. Then it automatically unloads the board and stacks it with rest of the finished products. |
Grinding and pulverizer combined machine |
|
The PVC crusher cuts big pieces of PVC foam board into small bits; so that they can be grind or pulverized into powder that’s mixed with the fresh batch of raw materials. |